文章

• 

  Algum ponto importante da máquina de balanceamento

  Some Important Point of Balancing Machine--Unstable Value Due to certain restrictions, o desequilíbrio do rotor deve ser repetível. A faixa de massas desequilibradas limita as tolerâncias alcançáveis. What is uncontrollable is that the transfer of various different masses in the rotor will seri ...

  Ler mais
• 

  Pergunta comum da estação de teste de máquina de balanceamento Jizhi

  Answers to common question about testing station The data fluctuates greatly, and the angle is also large.There are two types of data runout, one is the runout between 5-10, and the second is the runout between 30-50-100.The first type of runout is basically a mechanical interference. It can ...

  Ler mais
• 

  Brief Introduction for High Speed Balancing Machine

  The high-speed dynamic balancing machine is an important part of reducing the vibration level of large steam turbine units. In order to improve the balance accuracy and reduce the power consumption during the balancing process, issues such as balancing requirements and balancing methods have bee ...

  Ler mais
• 

  Equipe da JZABM visitou a AMETEK R&Centro D e base de produção

  Em janeiro 2024, uma delegação do Departamento de Negócios Ultramarinos da JZABM chegou à Europa para fazer uma visita in loco às subsidiárias alemãs e tchecas da AMETEK. A visita tem como objetivo fortalecer a parceria estratégica entre as duas partes no campo da manufatura de alta tecnologia e explorar as possibilidades ...

  Ler mais
• 

  Technical Points of Rotor Dynamic Balance（Chapter 2）

  Number of correction planes The number of correction planes and the selection of the axial position are based on the principle of the mode method, there are N method and N+2 method, that is, the number of correction planes is determined according to the mode order N to be balanced. T ...

  Ler mais
• 

  Technical Points of Rotor Dynamic Balancing Machine (Chapter 1)

  Selection of calibration surface The operation of removing the unbalance of the rotor and making it in a balanced state is called balance correction. The balance correction is performed on a plane perpendicular to the axis of the rotor, which is called a correction plane.   The m ...

  Ler mais