기술 자료

• 

  Dynamic Balancing Accuracy Grade

  The part that rotates around the axis in the machine is called the rotor of the machine. If a rotor has a uniform mass distribution and is manufactured and installed properly, the operation is balanced. Ideally, the pressure on the bearing, other than gravity, is the same as when the rotor is no ...

  더 알아보기
• 

  로터 밸런스 수행 방법?

  Balancing is the process of attempting to improve the mass distribution of a rotor, so that it rotates in its bearings without uncompensated centrifugal forces. This is usually done by adding compensating masses to the rotor at prescribed locations, or removing excessive masses from specified lo ...

  더 알아보기
• 

  불균형이란 무엇인가

  로터에는 일반적으로 주축이라고 하는 회전하는 것을 "자연적으로 선호하는" 축이 있습니다. 직관적, 그것들은 질량 중심을 통과하는 축이며 이 축 주변의 질량 분포는 균일하고 대칭적입니다. 물리적 로터에는 물리적 회전축이 있습니다,즉. engine ...

  더 알아보기
• 

  회전 부품에 동적 밸런싱 기계가 필요한 이유?

  Dynamic balancing is a process of rotor testing and calibrating, so as to meet the requirements of use. When parts are rotating, such as various motor rotors, transmission shafts, 스핀 들, 팬 들, 물 펌프 임펠러, 팬 들, motors and steam turbines. Rotors, 등., are collectively referred to as ...

  더 알아보기
• 

  밸런싱 기계 정기 유지 보수 항목

  Automatic Balancing Machine Regular Maintenance Items Clean the machine from dust and iron and keep the machine table clean. 기기의 소모품이 손상되었는지 확인하십시오. (예를 들어, testing station belt) Spray anti-rust oil to prevent the machine from rustin ...

  더 알아보기
• 

  Jizhi 밸런싱 머신 사용 방법?

  Common Questions in Balancing Machine The data is large and the angle is large. 다음과 같이 확인하십시오.: 속도가 정상인지 확인하고 벨트가 마모되었는지 확인하십시오.. Detection was unsuccessful There are generally two reasons for the unsuccessful detection. The first is tha ...

  더 알아보기