電話: +86-13867468007 電子メール: market@zjjizhi.com

我々について お 問い合わせ |

JZABMバラク加工機杭州Jizhiメカトロニクス株式会社.
バランシングマシンは中国の企業に上場しています

RotorHardBearingBalancingMachine-DynamicBalancingMachineManufacturer-JZABM(上場企業)

万能釣合い試験機/ベルトドライブバランサー/アプリケーション別のバランシングマシン/釣合い試験機/自動バランサー/

ローターハードベアリングバランシングマシン

Rotor hard bearing balancing machine is a mechatronics device used to measure the dynamic balance of the rotor of a new energy motor. It uses a PLC as the main control machine to complete test-related calculations and rotor phase control, and a touch screen as a man-machine communication interface for parameter setting and the operation of the machine, which makes the operation very simple.

 

  • 製品概要
  • 技術的な変数
  • サンプルローター
  • よくあるご質問(FAQ)
  • Packing & Delivery

Rotor hard bearing balancing machine is a mechatronics device used to measure the dynamic balance of the rotor of a new energy motor. It uses a PLC as the main control machine to complete test-related calculations and rotor phase control, and a touch screen as a man-machine communication interface for parameter setting and the operation of the machine, which makes the operation very simple.

Using a single system control, ローターパラメータの設定, the entry of rotor types, 不均衡なデータの処理, and the replacement of tools and fixtures in the measuring unit can be easily completed. また、データ記録機能も備えています.

製品の特長:

01

ハードウェアフィルター回路は、外部振動やその他の干渉の干渉を減らすために使用されます, 高精度な測定が可能.

02

As it uses PLC control and equipped with a fully functional software system, the relevant setting parameters, rotor type, 等. can be set and input at one time.

03

Since there is actually no rotor with zero unbalance, the correction method of this device adopts the unbalance electric zero adjustment method, so there is no need to specially make a standard rotor with zero unbalance.

04

It can be equipped with manual vertical and horizontal deduplication devices according to requirements

ローターハードベアリングバランシングマシン
アイテム 技術仕様
Min. achievable residual unbalance 0.1GMM/KG
アンバランス削減率 ≥95%
Balancing Accuracy G2.5
Outer diameter of rotor support part φ8-φ120mm
Maximum rotor outer diameter φ500mm
Support distance 150-600ミリメートル
Max.Rotor weight 100キログラム
Measuring Speed 1650回転数
Power Supply Three Phase 380V±10%,50HZ
Drive Motor 0.75kW Three-phase asynchronous motor(ManufacturerABB)

所見: 実際の仕様に基づく (顧客のrequiementにaccroding交渉することができます)

ローターハードベアリングバランシングマシン

ローターハードベアリングバランシングマシン

Q: いつ生産を手配しますか?
ある: 通常、商品の在庫がある場合は、お支払いを受け取った直後に生産を手配します. 然も無くば, リードタイムについてはお問い合わせください.

Q: ご利用可能なお支払い方法は何ですか?
ある: 電信送金, PayPalとウエスタンユニオン, とアリババ貿易保証.WeはPayPalとウェスタンユニオンのみを受け入れます, 400米ドル未満の支払い金額に対するアリババ貿易保証.

Q: 通常、どのロジスティックフォワーダーと協力していますか?
ある: 私たちはEMSと協力しています, TNT火薬, 無停電電源装置, FEDEXおよびその他のLogistricフォワーダー. 出荷用に独自のフォワーダーを割り当てました.

Q: Wireless Charging Bundleでデバイスが充電されない場合はどうすればよいですか?(s)?
ある: 1. デバイスがQiに準拠していることを確認してください.
2. Wireless Charging Bundleで使用しているACアダプタの出力が2A以上であることを確認してください.
3. スマートフォンをワイヤレス充電バンドルの中央に置いていることを確認します.
4. 充電するときは、電話が5mm以上の厚いケースに入っていないことを確認してください.
5. 電話/電話ケースの背面に金属製の障害物がないことを確認してください, またはケース内のクレジットカード.
6. Wireless Charging Bundleのケーブルが故障している可能性があります. 別のケーブルを使用してみてください.
7. スマートフォンを再起動する. 問題が解決しない場合, 18ヶ月の保証を請求するには、support@anker.com までメールでお問い合わせください. 所有者に送信された要求.

Q: Wireless Charging Bundleの充電速度は、従来の有線充電器と比べてどうですか??
ある: それはあなたのデバイスに依存します, ただし、ワイヤレス充電は一般的に遅い速度で充電されます.

Q: Wireless Charging Bundleの充電速度は??
ある: 充電速度はデバイスによって異なります. 最大充電電流は1Aです.

Q: Wireless Charging BundleではどのようなACアダプターを使用すればよいですか??
ある: 使用するACアダプターの最小出力が2Aであることを確認してください, そうしないと、デバイスが正しく充電されない可能性があります.

Q: Wireless Charging Bundleに付属しているケーブルの代わりに別のUSBケーブルを使用できますか??
ある: はい, 他のマイクロUSBケーブルを使用できます, しかし、最大限の安全性と性能を確保するために, デバイスの元のケーブルを使用することを強くお勧めします (OEMメーカー) ワイヤレス充電バンドルでデバイスを充電するには.

私達の繊維光学ケーブルのパッケージすべては輸出木のドラムとあります. 屋内FTTHケーブルの木製寸法は50x50x32cmです, 配達長さ3km/drum, 屋外の光ファイバケーブルの木製寸法は110cm * 110cm * 70cmです, 0.85シービーエム(CBM), 約ロードすることができます 33 20GPのドラム。また、顧客からのカスタムケーブルドラムを受け入れます. お問い合わせへようこそ!

GYTS 直接埋設シングル装甲ダブルシース光ファイバケーブル

GYTS光ファイバーケーブル画像

配送の選択

前:

次に:

伝言を残しておいて下さい